Quote:
|
Originally Posted by Adasm
hi there, im recently a new lumina owner (93 euro 3.1) and im likin it thus far...but, it hasn't been certified yet and i've lately been tinkering with it to get it up to spec, but im down to one last thing...the horn...i've figured out that there is a short in the ground wire coming from the relay to the steering column...what I want to do is simply bypass that wire and run a new one from the relay to the steering column so I can sytill utilize the horn switch on the steering wheel, but I have no clue which wire heading into the steering column is the horn wire...i've been looking for schematics but can't find any whatsoever, I do know that the wires going into the steering column operate the hazard light switch, the horn, wipers/washers and cruise control...if anyone has had this problem before and knows which wire is which or knows where i can find some good detailed schematics, please lemme know...thanx
|
here you go buddy. Good luck.
http://bulldogsecurity.com/
i pulled this off there for you.
HORN BLACK (-) @ STEERING COLUMN HARNESS
The horn wire is black, and a negative wire. located within the steering colum harness.