Thread: Passlock System
View Single Post
Old 01-02-2006, 06:55 PM   #13
MT-2500
AF - Advisor
 
MT-2500's Avatar
 
Join Date: Sep 2005
Location: New London, Missouri
Posts: 16,690
Thanks: 5
Thanked 121 Times in 120 Posts
Re: Passlock System

Ok
Fellows be carefull out there.
I ran this by an double checked it with a GM master anti theft tech.
And here is the hole ball of wax on it.

quote
there is no such thing as Passlock 1 or 2, unless you are talking about PassKey, which has 1,2, or 3....

As for cutting a wire while the vehicle is running(FIRST YOU HAVE TO GET IT RUNNING IF IT'S IN A NO START MODE), this might work, IT MAY GO INTO FAILSAFE MODE, but I'm not into cutting wires to make something work....and guess what, if your battery dies, needs to be replaced, or is disconnected for any reason, then you are screwed, because then it will NEVER START...

As stated there if your battery goes dead or is unpluged you may have to replace the pcm and anti theft module.

And a gm anti system is not the only system that can have total shut down from anti theft system being jumped or unpluged. Or a dead battery problem.
MT
__________________
Remember proper testing gives us the answer to many problems.
MT
MT-2500 is offline   Reply With Quote