Quote:
|
Originally Posted by kees45
Will this work for a 2002 Impala as well?
|
Yeah, you have Passlock 2 also. If you are afraid to cut the Yellow wire, just unplug the plug with the 3 Passlock wires on top of the ignition lock cylinder while the car is running and it will provide the same end result. This way you can see it work and feel a little more at ease before you cut the yellow wire to install a toggle. It's just sometimes a little harder to get to the plug on some vehicles. Here is a suggestion that I found on how to get to your wires.
NOTE *1 To get to the IGNITION SWITCH HARNESS, you MUST remove the RADIO without unplugging the radio. Make sure you catch ALL ignition wires at the back of the ignition switch.
This shouldn't take very long at all! By the way, I am just getting basic info at
http://www.bulldogsecurity.com/ and clicking on Vehicle Wiring Diagrams---then select your make---then select model and year to get hints on how to access the Ignition Lock Cylinders. It also tells you which anti-theft system you have for your particular car. Welcome to the Anti-Passlock Club!