|
About 2 years ago i was having a problem with the Power accessories/keyless entry not working, including the seat. The Fuse would get ultra hot when it was in. Once the fuse cool down id put it in and get power seats and keyless entry for about 1 minute, than nothing. So i started by checking the power seat (on my 97 only the drivers). Went underneath and pulled the controller out and there it was. A frayed wire was grounding on the seat causing my fuse blow issue. Patched up the wires (GM wanted around $30-50 cant remember for the wiring harness, so i just did a thorough wire repair) and i saved the hair on my head. So if anyone is experience this or any other problem related with a fuse blow out issue, thats a good place start. So this may confirm some of the other peoples fixes, where as theirs was corrosion mine was a fray issue.
|