Quote:
|
Originally Posted by Mendez79
I have a 1987 Ford Ranger That I just replaced the Flywheel And the Starter and it still seems to have a grinding noise as it starts Could some one please tell me a fix for this. Also I ran it out of gas a couple of days ago and and has not ran right since it will start up but it seems to be missing or not getting enough gas i took the fuel pump off and checked it pumped fine and i also took the fuel filter off and replced it I don't know what else to check Someone PLease HELP
|
Have you looked into the starter solenoid? I wonder if it could be sticking, and causing the starter to run too long...
Only thing I can reccomend on the fuel delivery issue is to test it with a fuel pressure tester. Some models of Rangers have 2 fuel pumps. The intank is the low pressure supply to the rail pump, the rail pump is the high pressure pump. But yours could more than certainly only have 1 pump.
Also, you may want to run the codes and see if you're chasing after the right problem.
Pete