On Dec 3, 2005 I took by Chrysler 300C to the car wash. The vehicle was operating fine going in the car wash, however, after they cleaned my car and I got in to leave the car wash, the vehicle would not go into gear so I could drive off. I then put it in reverse, but nothing. I removed the key from the ignition and cranked it up a 2nd time and the vehicle went into drive. I stopped at the first stop light and after the light changed to green, I tried to pull off, but nothing. I then removed the key from the ignition and reinserted the key, cranked the car and put it into drive and it moved forward at no more than 10 mph. I took the car directly to the dealer - Neuwirth Chrysler in Wilmington, NC and it has been there from Dec 3rd to Dec 28th 2005. The transmission is completely out of the car and they refuse to give me a car to drive while they are repairing my transmission. They plan to rebuild the transmission in this new 2006 Chrysler 300C Hemi with 7000 miles. Also, I learned that there is no way for the customer to check the transmission fluid because they purposefully did not design the car for it to have a transmission dip stick for the customer to check the transmission fluid like the dip stick to check the engine oil.
What should I do and has anyone else experienced a similar problem with their Chrysler 300C Hemi?
Please rely