|
noise
does it make this noise when its in 4WD ?? according to exactly how much backlash you have will determine how loud the gears will be back lash has to be exact or if its too much backlash it will make a noise..an easy way might be to take the rear drive shaft out (you might have to jack the rear of the truck up to keep the tranny fluid in and use jack stands !!!) and put the truck in gear (while running) and just let it shift once or twice then if your noise is still there its the t-case or possible tranny but this will eliminate the rear end... when it shifts out and you see what the noise is shift the transmission to neutral and switch it off...if you dont do this the transmission will grind and break something because there wont be anyway of stopping the shaft inside the tranny except for switching the truck off !!!
|