Quote:
|
Originally Posted by Ironwolf
Anyone can give me the steps in removing drivers inner door panel.
has power doors and locks. Don't want to force anything.
1990 Buick Lasabre
|
Easy job once you see how to do it. I own a '90 and have removed many of these panels. Here's how.
Remove switch panel by easily prying up.
Remove screw holding front of panel under switch trim.
Pop off rear deflector, remove screw.
Pry back fabric from door handle at both ends, and remove two large screws.
Remove visible screws(same size as above) 3 or 4 holding center of door panel to door frame. (you'll see them with switch plate removed)
Remove small cover over bottom of door side seat belt. Remove any screws visible.
Loosen seat belt cover on top of door by prying off gently and remove two screws. Slip belt through door panel fabric when removing panel.
Then pop off or pry off (door trim tool works great) with tool along bottom and sides. Door panel then lifts off. Good Luck