View Single Post
  #4  
Old 12-27-2005, 06:19 AM
rlith's Avatar
rlith rlith is offline
AF Enthusiast
 
Join Date: Jun 2003
Posts: 3,549
Thanks: 0
Thanked 1 Time in 1 Post
Send a message via AIM to rlith Send a message via MSN to rlith
Re: Re: Re: Front diff seal change

Quote:
Originally Posted by frehol
No, it's the seal on the left side of the diff, on the shaft that drives the left front wheel...
Ahh...shoulda paid more attention to your first message... It's not that difficult, just time consuming. You'll need a bench and a press to get the prop shaft out. At that point a regular seal remover or hammer and a screwdriver will work to remove the seal. Use an oversized socket and a hammer to install the seal... And tap the yoke for the front prop shaft back into place...(For all this you will have to split the transfercase open. You will need a new gasket for that.
__________________


95 s10 Blazer, EGR Mod, ZQ8 Steering box mod, 99 Center console shifter mod and more... See everything at www.pghconsulting.net/teal
Reply With Quote