Quote:
|
Originally Posted by Tony
easiest way to hide your amp wires ofcourse is the carpet. Just take the panel off thats at the bottom of the door jamb, and pull it back, should give you enough room to run your wires, you will have to be a little creative to get them around your trunk and gas tank release, but they will hide. Run them down low like that to your back seat, then pull any panel you need too to get the wires around your back seat and into the trunk. Im guessing you have a 4dr so I don't know anything about the back. Just run your wires under the carpet all the way to your amp, cut 1 hole in the carpet(you don't have to cut the hole completely out, you can leave it flapping there if you ever plan on taking the amp out, or moving it, or whatever) get you some spacers to raise you amp up just a little bit to give the wires room to run out from under the amp. That will give you a nice and clean look while keeping your wires hidden from jackasses.
|
yeah its a 4 door, so do the panels pop out easily or do u gotta be really careful? my beretta they have screws holding them but not the case here