|
Re: 1999 Grand Am Heater
i find it hard to beleive the bushings are shot. But I guess nothings impossible. But I would say that is the case, since it works when you bumpstart the blow motor.
Welcome smoke44 ! its under the dash panel(down on the floor) on the passanger side, that'll need to be removed. Should be a big black box under there too, thats the Body Control Modul(BCM).
But first check the fuse and relays, if you havnt already.
Two plug-ins on the blower, one is power and the biger plug, has 4-5 wires, is the resistors connection. Remover the three screws holding the blower motor in and the resistors inside there. They cost about $25, depending on where you live.
Good Luck, and Happy Holidays Everyone!
|