View Single Post
Old 12-26-2005, 01:14 AM   #12
Techventure
AF Newbie
 
Join Date: Dec 2005
Location: Sebringville
Posts: 88
Thanks: 5
Thanked 0 Times in 0 Posts
Lightbulb Re: 1991 Toyota Camry that keeps going and going

Quote:
Originally Posted by Toyrolla
My 88 I4 daily driver odometer reads 203870, and it's on its second tranny.

I'm going to install a tranny cooler before the spring.

The general rule of thumb is:

"Take care of the car and it will take care of you."

I'm just replacing on my 1992 V6 camry, the timing belt, drive belts, dist. cap & rotor, new NGK plugs, new wires, new sealing on valve covers and oil pan and new water pump. I'm cleaning and coating areas for protection underneath and one area that hasn't been mentioned is the hydraulic and fuel lines running down the engine compartment firewall and along the bottom of the car on the drivers side. These lines have a protective cover with slots in it for drainage....put there to protect the lines from damage from stones, etc. In my part of the country...Ontario, Canada our roads are sanded and salted and this brine mixture with the sand grit becomes trapped between the protective cover and the bottom of the car and corrosion starts eating the lines away. This is my 2nd. camry...had a great 85. I oil inside the panels and underneath but this doesn't do much for these lines. I'm removing the cover and cleaning and coating the lines and cutting a 2-1/2 - 3 " piece of pvc lengthways.Than take a wax seal they use on toilet sealing installations, soften and coat the lines. You can paint them first with a tremclad and then coat. If you have space left fill the pvc with a grease....it sheds water and then cover the lines with the 1/2 pipe by attaching galvanized straps with galv. self tapping screws or use the old screws. For extra protection put on a coat of tremclad on the straps. If you want you can drill bottom holes every ft. or so to let out any H2O that may get in ...it will fall to the bottom. Pvc is one cover. You could have an aluminum piece rolled with flanges made by a window company. Probably many other possibilities.
These are critical lines and you can't see them unless you remove the cover. You may get an unwanted surprise. Can be checked each year or more often.
Some food for thought!
Techventure is offline   Reply With Quote