View Single Post
  #2  
Old 12-21-2005, 10:44 PM
CivicSlayr's Avatar
CivicSlayr CivicSlayr is offline
AF Regular
 
Join Date: Jul 2004
Posts: 148
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to CivicSlayr
Re: neons with dome light

Wire your positve on the neons to 12v positive. (wire it into the accy. spot on your fuse box.) Ya know those little pegs in the door jams that go in when you shut the door. Yea tear out the interior to get to the back side of on of those pin things, wire your ground into the wire connected to the little door pin.

Your dome light is a constant circut. That light ALWAYS has 12v pos going to it. When you open the door that little pin in the door jam comes out, inside the pin there is a peice of metal that only makes contact with ground when the pin is fully extended (the door open) the ground for the door is wired to this piece of metal. So the dome always has power, just like your neons. But only has ground when you open the door.


Now that was for if you have your dome set to come on when the doors open. If you mean the manual turn on, yeah you have to actualy dig into the dome light to splice into the wire going from the switch to the actual light. Sorry bud.
__________________
"This cop was on my ass, but then i hit my overdrive button and i was gone... swear to god."-Mike Miller


Civicslayr don't post much, but when he does post youd better read it or he'll come over to your house and pimp slap you. -Slammed2themax

A must read: The Bathroom Strory
A must visit: Fecklessthings
Reply With Quote