Quote:
|
Originally Posted by calgonix
Hi, does anyone have a write up/tips for replacing the stock head unit? Mainly I want to make sure I get the surrounding bezel of safely without breaking it in half due to "hidden" screws.
|
1. Pull the ashtray out. Unscrew the 2 screws in there.
2. Unscrew the 1 screw that is in the center of the radio bezal, above the radio, the screw is facing up. Take the radio bezal off.
3. unscrew the 4 screws holding in the radio
4. Pull radio out, careful to not pull the wires too far.
Your done.............