Quote:
|
Originally Posted by pjdn
I have run through and completed the troubleshooting of all (5) things you listed.
I have no power from the fuse to the light switch and when I turn on the lights the DRL's and dash indicator light go off.
I then started pushing and pulling on the wire harness going to the turn signal on the steering column looking for a possible short. Bingo! The lights started working and brights also with the tilt steering in the down position only. When I tilted it up more than (2) notches they would go out. I then checked out the connection to the turn signal and found it to be a solid connection. The harness actually unplugs about a foot down under the dash.
It would help to know what color wire I should be looking for. I have removed all wire-ties to try and isolate the short or broken wire if there is one. Sorry for any confusion. Im not not much of a technical writer.
I do however appreciate any help I can get.
|
You're doing great man. You said you don't have any power from the fuse to the light switch, but after reading your post you definately do. The wire coming from the DRL module to the dimmer switch is a yellow one. In that connector ( C266) there's about 4 yellow wires. The wire your looking for is in pin E13?? As I look at the book it's the lower right. In the upper left look for a white or pink wire. Next to E13 on the same row is a purple wire (DRL feed) and next to that is a light green wire (high beam feed). These wires as I see it are not part of the "unplugable" part of the connector. Let me know what happens. I'll be looking...........Steve