[97GSTspyder]

i'll post a pic of the can in a bit (gotta recharge my camera)...i applied 3 coats of black, making sure the first coat was light, but still covered all the tan. and then 2 thicker coats. as for the clear, i might clearcoat them. i have to see how glossy the stock black color is first (i know it's not very glossy). so which means i'll have to wait till it's completely cured and hold it next to the dash.

i had an idea. i seen a couple spyders with the 2 seater conversion piece (the piece that covers the whole rear and has 2 bubbles, 1 behind each seat). i'm thinking about getting that piece, have it painted to match my exterior color, then building a 'wall' behind the seats. not sure out of what material, though. then laying black fabric on it (like i did with my visore), cutting 2 holes in the wall for subs, then having the amp mounted in the center. then i was thinking of making 2 'peep holes' and having them covered with plexiglass. then have a constant green light (that turns on with tail lights) behind the wall so my painted rear pieces are still visible. anyone think that's a good idea? i've never seen an actual wall behind the seats like this on a spyder w/ the 2 seater conversion.