Quote:
|
Originally Posted by JRC99
The brake lights on my suburban are not working. The upper center light works, but the brake lights in the tail lights do not come on. All other lights and signals are working fine and fuses are good. Checked the bulbs and there is no power. Any ideas on where the problem might be?
|
A ?. You say that all other lights and signals are working fine. Does this mean that the rear turn signals and the rear flashers are working? There are three things here. 1)Wiring, 2)Stop light switch & 3)Turn signal switch. If the rear hazards and turn signals are working then the wiring to the stop lights is probably ok since they all use the same lights. If the center brake light is working then the stop light (brake) switch is probably ok. That leaves the turn signal switch. Let me know and I'll do some more digging.............Steve
PS: There is a Suburban forum in this group for future posts.