Quote:
|
Originally Posted by kustomkid54
From what this old man understood, you don't drill thru the hex on the supercharger. Don't want metal inside it. And it's not too tight.
I had to help a friend get the ones out of a 426 Hemi once. Told him not to call me again. You want to talk about a pain.
|
I agree. It would be in a worst case scenario but with the snout removed. My screwdriver method or similar should work. I know because I've done it before. It is always a good idea to use the right tools for the job even on a simple SC plug.
BTW - You should have let me known earlier that you were going to sell the GTX. We could have swapped out nose drives (your Magnusson for mine).
