|
Put your steering wheel all the way down. Remove the 2 screws that are at the top of the bezel. That cover is held by 2 pins at the back that are located at the lower corners of it. You have to pull hard one side at a time to release the pins. Pull hard but carefully. You'll hear a "Clack"!!! Don't worry you didn't broke anything, you just released the pins on the back.
Take out the bezel and look for the metal pins inside the dash and proceed to remove the cluster. To remove th bezel start from the top and then the sides.
When you put it back i recomend that you don't put the pins back, just in case you want to take out the bezel again. Just put the bezel back with the screws.
|