Hello all. I am so glad to find this forum. I have had the passenger side clicking as well. And also the intermittent wiper issue that seems to happen to a lot of people.
With the signal clicking noise, would it be best to replace the switch behind the gove box or the actual signal/wiper switch on the steering console?
any advice is greatly appreciated.
Quote:
|
Originally Posted by riccbhard
Yes; the multifunction switch has a known problem of grease running from the switch into the contacts causing constant low-current clicking of the flasher.
Dont get this confused with a metallic "pa-ting" when the temperature changes inside or outside the vehicle; this is caused by expansion of the various metal parts behind the dash and is normal. This occurs nowhere near as often as the turn signal clicking, and that's how to usually tell the difference.
I've heard the metallic sound a few times in roughly 20 minutes. Some people may mistake this for a intermittant problem of the turn signal. The turn signal/multifuntion switch problem sounds like you have the turn signal on constantly; clicking one or two times a second.
|