[civic_rider]

OK so I got the tank out by prying on it and found a good one (mine was full of rust) from a junk yard. I have an SI and the one I found was from a standard non SI so I used my pickup tube in the new tank. I put it all back together and I now the fuel pump won't prime. The pump runs and all, but it doesn't suck up any gas from the tank. Does the fuel pump need to be manually primed to get it started or should I look for a loose connection? One last thing. In the past I noticed that the pump will not prime if the fuel cap is not on. The fuel cap is on and if I remove it after turning the key a few times I can hear the pressure in the tank releasing.

Thanks