[StiffyLS]

Thanks again MagicRat, put new plugs, wires, cap and rotor on and that didn't help much, alittle more responsive, but that's because my jeep needed new plugs and stuff anyways. So now I pretty much narrowed it down to the carb, I'll pull the top tomorrow and check if the metering rods are working correctly, I thought since this was remanufactured that I wouldn't need to do this, but then again, since I did have 2 Tomco reman. carbs that had problems, it would figure these guys don't take their time rebuilding them. The Carter BBD I have now was reman. by Champion and have had a lot less problems, besides the full throttle problem. Also, at half throttle, I don't get nearly as many bog-downs as full-throttle but it still happens.

Thanks!