View Single Post
  #2  
Old 11-13-2005, 06:34 PM
rlith's Avatar
rlith rlith is offline
AF Enthusiast
 
Join Date: Jun 2003
Posts: 3,549
Thanks: 0
Thanked 1 Time in 1 Post
Send a message via AIM to rlith Send a message via MSN to rlith
Re: 96 blazer transfer case problem

Quote:
Originally Posted by kpfblazer
we just bought a 96 blazer.
In 2hi the front wheel indicator lights up. Shouldn't this be out in 2hi?
Also when driving in 2hi, the light for the front wheels will go out around 60 or 70mph. When you slow down it sounds like the front wheels are trying to engage. After you stop on shift into 4hi or 4lo and then back to 2hi, the sound stops. Then maybe 30 or 40 miles down the road it will make the sound like it is trying to engage.
help?
Check your vac actuator under the battery for holes or tears, check the vac line running from the vac actuator to the transfer case vac switch..If those are ok, it's the vac switch on the transfer more than likely...But I would lean more torwards the actuator not engaging the front fully because of vacume leak.
__________________


95 s10 Blazer, EGR Mod, ZQ8 Steering box mod, 99 Center console shifter mod and more... See everything at www.pghconsulting.net/teal
Reply With Quote