Quote:
|
Originally Posted by mike2004tct
The go/no go situation definately points to the Ignition switch.
Check to see if you have voltage at the top of fuse #24 (tranny fuse).
If you do, it's a bad EEM. If you don't, it's a bad switch.
I recently had the same problem, and replaced the switch for a second time. But the no start/no spark/engine cranks/gauges pegged 1/4 beyond max persisted.
It ended up being a bad EEM ($600.00 charge).
|
Hey guys, thanks for the tip. I will be trying to replace the Switch tonight. Since I can't get it in gear, I have to try and install it myself. Is this an easy task?
Now I hope it's not the EEM, but I checked all the fuses and they all were ok.