|
Re: Taillights keep blowing out...
What you can do is if you have a volt meter and a wiring diagram for your car or access to one, test for resistance between the clostest connector between the headlights and the connecter closest to the headlights. Check the book for how many ohms you should have. Do a voltage drop test and it should be around 0 volts before the headlights. If not then you found your short to ground. Good luck
__________________
95 Eclipse GS-T
6 bolt built block - shooting for 450 hp..very doable
Currently:
A lot, check progression thread - updated 3/27/10
Estimated completion date:
Soon lol
|