|
Re: cant figure it out?
You might try removing the MAF mass air flow sensor and gently cleaning it with q-tip and mild cleaner like diluted 409 or alcohol. Be gentle as the thin wire inside is very delicate and it's a very expensive part. Oil blowback can get it oily and dirty, therefore it doesn't detect air intake temperature accurately. It's connected to the back of air filter box, two screws and wire connect. Don't lose the o-ring holding it in. Also old cap, and old plug wires can cause low ignition. I had a bad wire once which left me sometimes stranded, sometimes not, total freak show.
|