View Single Post
  #4  
Old 10-17-2005, 10:17 PM
zephram22's Avatar
zephram22 zephram22 is offline
AF Enthusiast
Thread starter
 
Join Date: Aug 2005
Posts: 313
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to zephram22 Send a message via Yahoo to zephram22
Re: Re: High Mount stop light... (? 1 of 3)

Quote:
Originally Posted by Indy8
I'm not sure of late models, but my '97 third brake light has two bulbs(left&right)and is accessed through the trunk. Reach up under the base of the rear glass and you should find holes or cutouts in the rear deck. Mine has the Bose subwoofer so there is a plastic panel I have to move out of the way. It's held on by two plastic rivets. LED WARNING! I spent HUNDREDS of dollars on converting the major exterior bulbs on my car using LEDtronics units. They are top quality(avg.$30ea)but man what a pain. One must understand that the electrical system of the car is designed to have a significant load on it. So the manufacturers selling point of "less strain on your electrical system" is not a good thing, which is why I had to install their 50 watt resistors all over my car. These become mini heaters that get very hot and cannot come into contact with any wires, rubber or plastic when they are mounted. The company rep was very polite and forwarded my request for tech assistance to one of their "engineers" who offered a couple of basic suggestions(things I had already tried)then I was on my own to try and get the signals to work without any further hacking of my car. The led's are not any brighter, regardless of what the company claims, the only benefit is instant on(no ramp-up time),cool burn(except for the resistors)and life span. They claim an extra 17ft. stopping distance from the person following you @ 60MPH because of the reaction time to the instant on. I did not blow any fuses or hurt the system. You won't have any problems with replacing the single-filiment bulbs like back-up and third brake. They will light when power is applied. Getting the parking lights and turn signals to work properly is the trick, even with both electronic flashers installed.
The 3rd brake light on the 2nd gens. are mounted on the headliner. It's easy to remove but I'd rather not do it just to check. I'm afraid I might damage the headliner or the light in some way. But, thanks for the help anyways.

Shaun
__________________
1963 Triumph TR3 12K
1995 Buick Century Special 178K
1999 Chevy Lumina LTZ 160K
2001 Suburu Forester 53K
2002 Oldsmobile Aurora 3.5 45K
2004 BMW Z8 3K
2005 Dodge Charger .5K
2006 Jaguar XJ12 1K

Reply With Quote