[BlazerLT]

Just for your information, guys, here is how it goes:

1.) The separator has a flow direction, it has an arrow denoting that direction.

2.) Hose connects to the pcv valve and travels to the inlet side of the separator.

3.) Then the hose connected to the outlet side is connected to the connectio on the intake.

4.) You are done.

See, it is so easy. Just use fuel line and not flimy tubing seeing the gas is hot and the tube will actually collapse from the vacuum and heat.

Also, do NOT try to get cheap with the hose and have the hose turned at sharp angles seeing you will be crimping the hose and restricting flow.

VERY IMPORTANT, KNOW THE SIDE WHERE YOU PCV VALVE IS AND NOT THE SIDE FOR YOUR FRESH AIR INTAKE.