Quote:
|
Originally Posted by hcowt
I have a 95 Windstar with 205,000 miles so its been a decent car. Now the car will not crank. It will turn over but no fire to the coil pack and the fuel pump does not activate. I have replace the Constant Control Relay Module and the Ignition Control module because of Recommendations from mechanic type friends. The wierd thing is that if I connect an OBD-II code reader to the port under the steering column th car cranks and idles and drives perfectly. But if I disconnect the OBD-II reader from the car there is no fire and no fuel pump activity. You can hear the fuel pump activate as quick as you connect the reader. The PCM is my next thought but I really have no idea what I am doing. I would appreciate any input. Thanks
|
Hcowt
Have you gotten any codes when you had the OBDII connected? Replacing a computer isn't really that hard. Get a manual, read, spend some time under the dash pulling the items the book mentions. Get a used computer from a bone yard. Used computers work until they get damaged. (like yours).
Just remember, remove the battery cable before working with your computer.
Regards
Dan