|
perhaps you'll find this article interesting:
http://www.g-speed.com/pbh/ae-honda-tech.html#bearing
I'm interested in what the detailed specs of your engine are. If you'd care to take the time to fill out the following list (or at least as much as you know the answers for), I'd appreciate it greatly.
1) what is the peak power output of your engine?
2) what rpm does peak power occur at?
3) what is the peak torque output of your engine?
4) what rpm does peak torque occur at?
5) what rpm is the engine limited at?
5) what is the bore?
6) what is the stroke?
7) how much do your pistons weigh (including rings)?
8) how much do your piston pins weigh?
9) how much do your conrods weigh (including bearings)?
10) how long are your conrods?
11) what is the piston pin outer diameter?
12) how long is the piston pin?
13) what is the diameter of the hole through the piston pin?
14) how wide is each piston pin boss (the part where the piston meets the piston pin)?
15) are there bushings in the pin bosses?
16) what is the diameter of the crankpins?
17) how long are the flat portions of the crankpins (between the fillets)?
thanks in advance...
|