|
Susan,
welcome to AF.
you shouldn't need any pics, as after you remove your cam cover (I think four 10mm bolts) and unplug the coil connector, you will have a complete blueprint in front of you.
a large white plastic shield is clipped to the underside of the cover, and I believe four black elongated boots clamp to the main cover to drop into the wells to attech to the spark plug tips.
under the large white housing, lies the coil pack (and also I think the control module?) which will be held by I am pretty sure 5.5mm bolts.
just remove and replace in reverse order.
hope this helps,
chris
nrt racing
|