Quote:
|
Originally Posted by muzzy1maniac
Will this work on all discs? I should have clarified in my OP but this for my kids Grand Am. I decided to post it here cause the knowedge base is so great and there are many here I trust.
|
Not necessarily, On my daughter's Sunfire, the studs are on the spindle/axle assembly (similar to a drum brake setup). But the process is the same. You do not need to remove any parts. Take a good look at the plate that holds the stud. By rotating the plate/axle/rotor etc, you'll come across an area that allows you to remove and install the studs from behind and away from the calipers. As stated above, just hammer the broken stud out, and re-install the new one.