|
I did mine around a month or so ago. I cant really tell what you have by the picture. AS far as the install goes, its not all that bad. pulling the turbo is easy. Just make sure you drain your oil. For my coolant i just dumped it into a bucket under my car and then topped it off when i was done. Also make sure you put all of the banjo bolts and the return line on and make them realy tight before you put the turbo on caude it is hard to get to them when the turbo is installed. You will probably have a problem or two but overall the install isnt all that hard. As far as boost you can run 14 psi on the stock fuel system without worrying about damaging anything.
__________________
97 TSI AWD
Apexi N1
RRE Downpipe w/test pipe, K&N FIPK, RRE lightened flywheel, ACT 2600, New short block installed due to crankwalk,autometer sport comp boost gauge,type-s bov, brode uicp, Johnny race car fmic with custom piping, evo 3 16g
Soon to be purchased: DSM link, injectors, fuel pump
|