IAC Replacement
I have the 3.9L V8 and it is pretty simple to replace. All it requires a 8mm socket and extension. It would be easier with a flexable socket if you have one. It is located right by the throttle body and has 2 plastic tubes connected to it at a 90 degree. They just squeeze off and pull-simple. and then disconnect electrical connector. No reprogramming required. By the way I justed pulled my off and cleaned it with air intake cleaner and some compressed air and worked fine now. You may want to try that first. Sometimes they just get carbon buildup inside and dont let the pintle move freely.
|