Quote:
|
Originally Posted by timothy47129
I had a wheel cylinder leaking so replace both my rear wheel cylinders,brake shoes and bleed them.My brakes still didn't work untill the pedel was 2inches from the floor.So I replaced my front brake pads and bleed all four brakes.My brakes stop good but I still have ecessive pedel travel(2"from the floor).So how do I tell if it is the power booster,master cylinder or the ABS system?My abs light is not on. Im thinking it is the master cylinder.There isnt a special way to bleed brakes with ABS is there?
thanks,
Tim
|
if abs or brake light isnt on means u dont have a major problem there
just make sure u bleed them right and no air is in the lines
also check and make sure u refill the reservoir till it says max
and cap is on tight
after all that is done,,if the car stopps right that rule out the booster
and abs
just check beeding and reservoir level