Quote:
|
Originally Posted by veedubmechanic
Have you tried replacing the ignition switch?
|
No. but I tried removing the plug from the switch and hotwiring it.
Since my last post I have swapped out the fuel pump relay and the
X post? relays to no effect.There is no relay in position 3 (ECM) but I think that is normal on this model.
I did continuity tests on coil and distributor wiring all good.
A voltage test revealed 12.5 volts at the coil but only 11.22 volts across the distributor plug connections. I considered that the Ignition system may have been losing connection while the starter was engaged so I tried an additional power connection to the ignition circuit still no start.
Still looking for good Idears.