[asemstr]

If you mean the relay on the fender I'll take a whack at it! The OEM relay has 3 terminals (2 large, 1 small) and should be wired like so: full time hot loads & + batt cable to 1 large terminal. Ign switche lead to small terminal. Starter cable to remaining large terminal. Aftermarket relays may have 4 terminals ( 2 large. 2 small) They are wired the same on the large teminals, but you need only 1 of the small for the switche lead. The relay should come with instructions for 3 term application installs! If not use trial and error to select the right one! Good Luck!