|
Re: Code Key BUT NO Code book
I'd get a Haynes manual as well.They have a pretty good write up and photos of the TBI rebuild.
You'll need torx (star) drivers for some of the screws. Also make sure to get new O rings for the fuel lines. My rebuild gasket kit didn't have them. Had to make another trip to the store.
You may have to do a little scraping to get the carbon out of the PCV port on the throttle body.
__________________
'89 Astro 4.3L Z
CFM-Tech power plate
2.5" exhaust, Low restriction cat and muffler
Jet stage I chip
B&M trans cooler
'96 Jeep Cherokee
'99 Chevy Cavalier
|