Quote:
|
Originally Posted by porcelien
The wire I want to connect to is the 12 volt input wire. I just want to hook it up when it quits me and see if it starts. Then I will know for sure if the problem is in the wiring or starter relay ahead of the coil or if doesn'work, the problem is in a sensor after the coil. A test light would tell me the same thing, but won't get me out of the middle of traffic, when it stalls.
|
You have to be certain by diagram that you are connecting to the correct wire. Check the connector itself for corrosion or a weak wire.
In another post with the same vehicle he checked the coil pack again & as it was checked the 12v wire came off in his hand. He is splicing a new connector as his was intermittent as well. It seems farely common on these