|
Re: Coax through firewall
There's a grommet on the driver's side between the fender and the brake booster.......just pop a coat anger or thin screwdriver through it.......ig you look inside the cab by the drievr's side footwell the grommet is behind the emergency brake when its fully depressed......its about a foot up in that corner.....that's where my light wires come through.......or if you can go under the cab there's a grommet right underneath the drievrs side carpet....look under the truck and you'll see the rubebr grommet.......my cb antenna wires are run throught here....
|