|
Re: bezel install help
Did you physically remove the cluster from the car yet?
You need to remove the 2 screws underneith the top of the dash (in front of the gauges). Pull off the trim piece that you just unscrewed by lowering the steering wheel all the way. Then you have to remove 4 screws so you can remove the cluster. It just pulls out, no wires or anything. Then you will have to unsnap the clear plastic cover so you can get to the bezel.
Hope that helps!
__________________
1997 Spyder GS-T
5-Speed
EVO III 16g, DSMLink, Walboro 190 lph Fuel Pump, FIC 650cc injectors, CoolingMist 150psi Methanol Injection, Greddy EVO 2 Cat Back, 2.5" Extreme DP, 2.5" Extreme Hi-Flow Cat, Injen intake, HyperDrive C1 Street Disk & PP, HyperDrive Lightweight Flywheel, 1g BOV, RRE UICP, Home Depot MBC, AEM UEGO WBO2, Brembo Slotted rotors, Akebono Ceramic Pads
|