|
Ok I just found G201 on my 2000, it is very simple to get to. Just remove the plastic runner board on the passenger side, the piece of plastic trim that runs along the floor. This plastic trim you will notice is molded so it follows the corner of the door on the hinge side and meets the bottom of the instrument panel, pull it off and G201 will be right there. this is where the IPM grounds and a number of other devices ground, if your problem is ground, this is probably the culprit. Now that I know where it is, I can see mine has some corrosion on it from my water intrusion problem, i'll bet yours is in bad shape.
|