Quote:
Originally posted by roberthenry
Can someone tell me how to reprogram a remote to fit my '97 Buick Riviera?
|
1- Turn off ignition
2-Use a 3amp fused wire and jump pin #8 to pin # 4 at the diagnostic connector located under the dr ivers side of the dash. Pin # 4 is solid black wire at the connector and Pin # 8 is a black/white wire
3- Close all the doors
4-Turn ON the ignition (the doors will LOCK then UNLOCK
5-Press and hold LOCK and UNLOCK on one transmitter until the doors lock, then unlock (approx. 30 seconds)
6- repeat step 5 for every transmitter being programmed
7- DO NOT TURN OFF THE IGNITION!!! Remove the fused jumper first, then turn off the ign and verify remote functions.