|
You may run into a little trouble with the AC unit getting in the way of reseting the lower manifold (aluminum). The upper manifold (plastic/mylar) is easy to get off and back on, a 10mm deep socket, 10 mm combo wrench, and a 5/8" tubing type open end wrench for fuel supply/return runner. just remember to re-attach all the computer sensors back exactly the way they came off. replace the two lower manifold gaskets (left/right) and ultra black for the front and back. The upper manifold gasket (O-ring type).And throttle body gasket if removed. Don't forget the proper torque tighting sequence when reassembling.
|