Quote:
|
Originally Posted by tblake
what are you using? Where is it located? are you using a combination wrench? Slip a 2 foot pipe over the end of that wrence (cheater bar). Gives you more torque. You'ld be suprized as to how much this actually helps. I'm probably suggesting things you've already tried. Sorry if I am. Its all I've got.
|
Funny you ask what tools I've used. Here is what I've used for starters.
Everything listed is 18MM:
Crows foot w/ ratchet only, w/ ratchet, 2 extensions and a universal joint
Pipe wrench
Pipe Crows foot w/ ratchet only; w/ ratchet, 2 extensions and a universal joint
Open end wrench
Some Liquid Wrench
Some stitches
And a 4 foot cheater bar ( no clearance to turn )
Now, this is what I've got in mind:
Cut the Rubber hose off to the steel pipe. Then get some High pressure hose and clamp the hell out of it.
If this don't work, I will cut the steel pipe off at the fitting and TRY to use a 18 mm socket to get the damn thing off.
If anyone else has any other idea's, please feel free to inform me.
I'm all about JERRY RIGGIN'!!!!!!