Quote:
|
Originally Posted by doommarine44
I found out a fix for it, I took it to a SMART mechanic, instead of the 6 other retards that looked at it.. including AAMCO transmissions, as well as the Isuzu stealership (they said they don't pull diagnostic codes so I got the vehicle asap.) it was simply the transmission wiring harness was on the exhaust manifold, burn up pretty good. Got that re-wired now it works perfect!!! Check that wiring harness..  |
already tried that, mine was the same way except all i did was replace about a foot and a half of it from the area around the exhaust manifold, it seems to have made a difference in it but occasionally it still goes into limp mode, i have found out though to get it out of limp mode i have to start the car, insert the power window fuse, turn the car off, turn it back on, remove the fuse, turn the car back off, then turn it back on, 99% of the time it works. i am thinking that something is wrong with the fuse box cause if u take out the fuse above it(TCM FUSE) it goes into limp mode, so maybe there is a connection wrong or a loose wire or something i dunno, but i might take the wiring harness back off and go from the beginning to each sensor with new wire and see if that fixes it for good