|
Re: Car is naked and ready for install-have questions
I would first try putting it in as one piece from the top if you can. When I did my swap I put the manifold on first, then the turbo + o2 housing together. The hard part this ways was that I needed a second person to be under the car to lift the turbo up in to the manifold. And the bolts took for ever to line up from the manifold to the turbo.
About the torque specs I'm dont remember so you will have to wait for someone else to answer that.
Good luck and have fun, I had fun installing my turbo. I felt like I really learned something when I did it.
__________________
"Life begins at 20psi"
97 Eclipse GST-X 5spd
PTE 5031e/pte 880cc/vr4 fuel pump/Devils Own Water injection 12gph nozzle/pre turbo meth injection/fmic 28x10.5x3.5/greddy type-s bov/12" K&N/FP intake/dsmlink/gm 3.3 bar/maft/blitz ebc/act 2600/act 6 puck/SS Clutch line/3" turboback.
|