|
Re: 28 lb/min on the Evo16g? Did I reinstall my T25 by accident?
I max out at about 9 or 10 samples/sec on mine too.
If you want to do the byte timing test you need to be on the "main page" where it shows the boost gauge and gives the options for diagnostics, view and datalog. Then click on the bottom left side of the palm screen (right below the house). This will drop down a menu from the upper left of the screen and will have the option for the byte timing test.
Also, if you click on the same icon when you are on the datalog screen, you can change setting for alarms, click anywhere to start log, etc. Provided you are using V2.0 (I don't know about V1)
I normally end up with about 30 - 40 data points after a 3rg gear pull.
__________________
1997 Spyder GS-T
5-Speed
EVO III 16g, DSMLink, Walboro 190 lph Fuel Pump, FIC 650cc injectors, CoolingMist 150psi Methanol Injection, Greddy EVO 2 Cat Back, 2.5" Extreme DP, 2.5" Extreme Hi-Flow Cat, Injen intake, HyperDrive C1 Street Disk & PP, HyperDrive Lightweight Flywheel, 1g BOV, RRE UICP, Home Depot MBC, AEM UEGO WBO2, Brembo Slotted rotors, Akebono Ceramic Pads
|