Quote:
|
Originally Posted by galantin
ok if you have or had the black plastic quick connect heres what you do, if you still have the black plastic on the quik-connect side do this: get a pair of needle nose pliers and gasp the filter between the quik-connect and the filter body, push the hose into the filter as if you were putting it back on and hold it, then pry up with the needle nose pushing the black plastic into the line away from the filter, keeping pressure on the the black plastic pull the line away from the filter. thats it, if you have ever used a quik disconnect tool it is the same way but it is built in the line. use the pliers only to push the black plastic up not to actually grasp it.
|
I have a green piece of plastic in the way. Do I need to remove the green piece of plastic first? It looks like it wraps around the black connector. Thanks