|
Re: Re: The Best Acceleration Mod
Quote:
|
Originally Posted by Igovert500
Basically 7psi is a conservative amount...to be safe if you don't have hte proper supporting mods, that maybe as high as the engine can handle. But as Hotshot and plenty of others have shown, if you have the proper supporting mods, you can definantly boost it higher.
|
well, just have to make sure that he has a tranny cooler. I ran stock turbos daily at 9 PSI with no other mods but a tranny cooler for a year, so thats not out of the question. Now if your gonna try to go any higher than 10-12 psi on stock turbos, then i'd recommend looking at some better upgrades.
__________________
Daily Driver: 2004 Jeep Grand Cherokee Special Edition
1994 Mitsubishi 3000GT SL-TT Automatic - Black
3.05 L Arias Forged Pistons, Pauter Forged Rods, DR Stage 3 heads, 3SX TD05 kit w/ E16G's, CX Racing FMIC, 550cc injectors, Walbro 255lph pump, + supporting mods
1994 Mitsubishi 3000GT VR-4 - Black
Intake & Boost Controller so far
2006 Sea-Doo RXP Supercharged, Updraded SC, IC + supporting mods
|